FLEXTRONICS Previous Years Solved Sample Placement Papers
-
BIOS stands for:
(A) Basic Input Output System
(B) Boot Input Output System
(C) Basic Internal Output System
(D) Boot Internal Output System
Ans: (A) -
------------------ is a type of memory chip to store the date, time, and system setup parameters:
(A) BIOS
(B) CMOS
(C) RAM
(D) ROM
Ans: (B) -
BIOS and CMOS are powered by a battery kept on the motherboard:
(A) Lithium Ion
(B) Sodium Ion
(C) Magnesium Ion
(D) Silicon Ion
Ans: (A) -
PC cards are used in _______ computers:
(A) Desktop
(B) Mini
(C) Smartphones
(D) Laptop
Ans: (D) -
------------------ is used to connect a modem and input devices:
(A) ISA
(B) PCI
(C) AGP
(D) PCI Express
Ans: (A) -
------------------ is used to connect graphic accelerator cards, sound cards, internal modems, or SCSI cards:
(A) ISA
(B) PCI
(C) AGP
(D) PCI Express
Ans: (B) -
Which among the following bus is the fastest:
(A) ISA
(B) PCI
(C) AGP
(D) PCI Express
Ans: (D) -
Which one of the following is correct with respect to the original Pentium motherboard to install memory:
(A) It has two 72-pin SIMM slots or one 168-pin DIMM slot
(B) It has only four 72-pin SIMM slots
(C) It has only two 168-pin DIMM slots
(D) It has four 72-pin SIMM slots or two 168-pin DIMM slots
Ans: (A) -
Disk controller is a circuit that enables communication between CPU and:
(A) Hard Disk
(B) Floppy Disk
(C) Any External Disk Drive
(D) All of the Above
Ans: (D) -
------------------ is a plug-and-play interface:
(A) Serial Port
(B) Parallel Port
(C) USB
(D) AGP Port
Ans: (C) -
Number of devices supported in USB is ------------------:
(A) 64
(B) 127
(C) 128
(D) 63
Ans: (B) -
What is the basic speed of USB ------------:
(A) 12 Mbps
(B) 8 Mbps
(C) 16 Mbps
(D) 32 Mbps
Ans: (A) -
------------------ is the interface that directs and controls reading and writing to a computer’s floppy disk drive (FDD):
(A) Hard Disk
(B) Floppy Disk Controller
(C) Any External Disk Drive
(D) All of the Above
Ans: (B) -
------------------ are used to connect external devices like printers, keyboards, or scanners to a computer:
(A) ISA
(B) Ports and Interfaces
(C) AGP
(D) PCI Express
Ans: (B) -
------------------ are used to connect communication devices:
(A) Serial Port
(B) Parallel Port
(C) USB
(D) AGP Port
Ans: (A) -
------------------ needs a single wire to transmit 1 bit of data:
(A) Serial Port
(B) Parallel Port
(C) USB
(D) AGP Port
Ans: (A) -
------------------ are used to connect external input/output devices like printers or scanners:
(A) Serial Port
(B) Parallel Port
(C) USB
(D) AGP Port
Ans: (B) -
CD-ROM drives or hard disk drives are connected to the motherboard through:
(A) Serial Port
(B) Parallel Port
(C) USB
(D) IDE Port
Ans: (D) -
------------------ ports are also called mouse ports:
(A) Serial Port
(B) Parallel Port
(C) PS-2 Port
(D) AGP Port
Ans: (C) -
------------------ port uses synchronous serial signals to communicate between the keyboard and a mouse to the computer:
(A) Serial Port
(B) Parallel Port
(C) PS-2 Port
(D) AGP Port
Ans: (C)